QUALITY SPECIFICATION
Power supply: AC 220V 50Hz/60Hz Single phse
Power consumption: 510W
Fuse: 5A
Wax capacity: About 3kg
Tmperature Precision: ± 0.2
Air pressore supply: 4-7kg/cm
Pressore range: 0-2kg/cm
Temperature display range: 40-99.9C
Temperature adjuseing rangs: 40-99C
Setting time range for vacuum: 0-24.9seconds
Timer rangs: 0-99.9hours
Weight: About 16kg
Dimensions: 450L× 310W× 450H(mm)
1) Do not position your eyes in fonts of the nozzle any time.
2) Place the foot switch at a hidden place, when the operator leavew the machine for long minutes.
3) Some exterior metal parts (such as the nozzle, the wax pot, lid)may become very hot, avoid to burns to skin.
4) Turn the air pressure regulator knob to "zero" when the operator the machine for long minutes.
5) Fix the machine on stable bench and eathing.
6) Rated fuse should be installed in soclcet, so that damage to the machine at unexpected shortcircuit can be prevented.
7) At the time of cleaning or maintenance work, do not wipe surface of the warning labels affxed to the surface of the machinc.
8) The machine can be used in dew condensation free ambients with remperature range 0 to 40 degrees celsius and humidty less than 90%R F.
9) The machine be used in stable alternating current 220V± 10% and 50Hz, single phase.
10) Do not use the machine at a place where dust or harmful gas is generated.
. INSTALLING
1)ACCESSORIES PR OVIDED:
Foot switch 1PC
Power cable 1PC
5A Fuse 1PC
2)PLACE
Mount the machine on a sturdy Aad stable bench.
Leave sufficient clearance around the machine so there daily work and maintenance shoule not be obstructed.
3)Plug of power supply cable insert into the Acpower socket with fit a voltage.
4)CONNECTING AIR COMPRESSOR
Connect the machine to an air compressor with minimum pressure of 4kg/cm, connecting See side figure.
Hand push blue ring of coupling see side figure.
Insert the tube(8mm PVC )
Loosen hand from coupling the tube will be Clamped by coupling.
Power supply: AC 220V 50Hz/60Hz Single phse
Power consumption: 510W
Fuse: 5A
Wax capacity: About 3kg
Tmperature Precision: ± 0.2
Air pressore supply: 4-7kg/cm
Pressore range: 0-2kg/cm
Temperature display range: 40-99.9C
Temperature adjuseing rangs: 40-99C
Setting time range for vacuum: 0-24.9seconds
Timer rangs: 0-99.9hours
Weight: About 16kg
Dimensions: 450L× 310W× 450H(mm)
1) Do not position your eyes in fonts of the nozzle any time.
2) Place the foot switch at a hidden place, when the operator leavew the machine for long minutes.
3) Some exterior metal parts (such as the nozzle, the wax pot, lid)may become very hot, avoid to burns to skin.
4) Turn the air pressure regulator knob to "zero" when the operator the machine for long minutes.
5) Fix the machine on stable bench and eathing.
6) Rated fuse should be installed in soclcet, so that damage to the machine at unexpected shortcircuit can be prevented.
7) At the time of cleaning or maintenance work, do not wipe surface of the warning labels affxed to the surface of the machinc.
8) The machine can be used in dew condensation free ambients with remperature range 0 to 40 degrees celsius and humidty less than 90%R F.
9) The machine be used in stable alternating current 220V± 10% and 50Hz, single phase.
10) Do not use the machine at a place where dust or harmful gas is generated.
. INSTALLING
1)ACCESSORIES PR OVIDED:
Foot switch 1PC
Power cable 1PC
5A Fuse 1PC
2)PLACE
Mount the machine on a sturdy Aad stable bench.
Leave sufficient clearance around the machine so there daily work and maintenance shoule not be obstructed.
3)Plug of power supply cable insert into the Acpower socket with fit a voltage.
4)CONNECTING AIR COMPRESSOR
Connect the machine to an air compressor with minimum pressure of 4kg/cm, connecting See side figure.
Hand push blue ring of coupling see side figure.
Insert the tube(8mm PVC )
Loosen hand from coupling the tube will be Clamped by coupling.