Usage KC-H-TC20RR is designed for roll-like PVC, ribbon or other materials such as stickers gilt surface heat transfer machine, it has two sets of feeding roll, a set of installation tipping paper, a set of installation need gilt roll material. It is widely used in ribbon, stickers, PVC film, ribbon, rubber stamping and other products.
Indirect stamping process: First, in gilt plasma screen above the ribbon, followed by then KC-H-TC20RR heat transfer machine transfer. For the indirect process, logo screen spacing depends on the spacing.
Direct stamping process: The silicone roller replacement for the round copper roller can be achieved directly bronzing. For the direct process, logo copperplate roller spacing depends on the diameter.
Technical Parameter
1. Size of Roller: 120mm
2. Max roller width: 100 mm
3. Max pressure: 100 Kg
4. Up-and down distance: 80 mm
5. Heat wattage: 1200 W
8. Foil feed: Motor Drive
9. Temperature range: 0 - 300oC
10. Net Weight: 310 Kg
11. Outer dimension: 1300 x 620 x 1430 mm.
12.1 Phase 220V.
13. Mainly Motor wattage: 180W;
14. Max Speed: 18M/M
Production Advantage
1, Table settings embossing roller, can be tightly foil paper or transfer film pressure in the ribbon surface;
2 Rubber rollers rotating heat transfer uniformity, suitable for ribbon continuous stamping;
3, Workbench can adjust the position of the front and rear direction, to ensure the best stamping position of the ribbon;
4, The transfer pressure, temperature, speed can be based on different material for the flexible adjustment;
5, The nose height adjustable stamping head movements can fine-tune, easy to adjust the height of the different products;
6. Precise temperature control system, temperature error control in less than 3 degrees; Silicone roll radiant heating, thermal efficiency of the utilization factor;
7. Rubber roller embossing pressure control system, constant pressure of the transfer process, the transfer effect is more perfect.
Indirect stamping process: First, in gilt plasma screen above the ribbon, followed by then KC-H-TC20RR heat transfer machine transfer. For the indirect process, logo screen spacing depends on the spacing.
Direct stamping process: The silicone roller replacement for the round copper roller can be achieved directly bronzing. For the direct process, logo copperplate roller spacing depends on the diameter.
Technical Parameter
1. Size of Roller: 120mm
2. Max roller width: 100 mm
3. Max pressure: 100 Kg
4. Up-and down distance: 80 mm
5. Heat wattage: 1200 W
8. Foil feed: Motor Drive
9. Temperature range: 0 - 300oC
10. Net Weight: 310 Kg
11. Outer dimension: 1300 x 620 x 1430 mm.
12.1 Phase 220V.
13. Mainly Motor wattage: 180W;
14. Max Speed: 18M/M
Production Advantage
1, Table settings embossing roller, can be tightly foil paper or transfer film pressure in the ribbon surface;
2 Rubber rollers rotating heat transfer uniformity, suitable for ribbon continuous stamping;
3, Workbench can adjust the position of the front and rear direction, to ensure the best stamping position of the ribbon;
4, The transfer pressure, temperature, speed can be based on different material for the flexible adjustment;
5, The nose height adjustable stamping head movements can fine-tune, easy to adjust the height of the different products;
6. Precise temperature control system, temperature error control in less than 3 degrees; Silicone roll radiant heating, thermal efficiency of the utilization factor;
7. Rubber roller embossing pressure control system, constant pressure of the transfer process, the transfer effect is more perfect.