Shenzhen Topfine Technology Co., Limited  

Follow0

Specifications
1, 720p Full HD DV
2, waterproof 10m
3, 2.0LTPS LCD Display
4. Support 32GB TF Card

NOTE: The DIGITAL CAMERA MASK will be referred to as the "CAMERA MASK" and CAMERA" and "MASK" throughout this instruction manual.
Disassemble and Assemble
Disassemble: Press and hold the lock button on top of the camera, pull the camera along the groove from the mask.
Assemble: Pull the camera toward along with the groove on top of the mask, and push
Towards left.

3.0 Set Up

3.1 Power On/Off
Power On:
Press and hold the LEFT button for around 3 seconds, the camera will vibrate and the blue indicator on.

Power Off:
Press and hold LEFT button for at least 2 seconds until the blue indicator off and alert ended.

NOTE:
1. We suggest to use CLASS 6 (High speed) Micro SD card for smooth shooting purpose.
Lower CLASS of Micro SD Card may cause video blur.
2. Ensure the camera is dry and powered off before taking out the Cap from the camera.
3. There is only one correct direction to insert the Micro SD card into the slot. Do not force the card into the card slot, as it may damage both the camera and the Micro SD card.
4. A new Micro SD card should be formatted before using.

3.2 Auto Power Off
1. When the built-in Li-battery used up, the blue indicator and red indicator will sprinkle slowly and alternately alarm. Then, camera will auto power-off in about 10 seconds.
2. When the memory is full, the camera will alarm and auto turn off within about 10 seconds.
3. The Camera will auto off when on operation for 3 minutes.
While shooting/recording, do not take out the TF card. Otherwise, the camera will alarm and turn off.

3.3 Charging
1. Charging by PC
Connect the camera to the PC via USB cable. The red indicator flickers and the green light is on when charging is in process. When the battery is fully charged, the indicator will off.
It takes around 3-4 hours to fully charge the battery

2. Charging by A/C adapter
Connect the camera to the A/C adapter, The red indicator flickers and the green light is on when charging is in process. When the battery is fully charged, the indicator will off. It takes around 3 hours to fully charge the battery

Important Note:
The camera requires a specific A/C adapter to charge the battery. Please consult your dealer and choose a correct A/C adapter to charge the camera. Improper A/C adapter could damage the camera/battery.

3.4 Mode Switch
When the camera is on, press LEFT button to switch between the Video Mode and Single Picture Mode.

Video Mode:
The blue indicator is on, recording icon appears on the LCD.

Single Picture Mode:
The red indicator on, shooting icon appears on the LCD.

3.5 LCD Display
On the upper area, the LCD displays the following symbols(from left to right):
"Single Photo" or "Video" (either one when selected),
"Micro SD"
"Battery Level"
On the main area, the LCD displays:
1. In Video mode, 4-digit number appears. It means maximum recording capacity.
The first 2-digit number indicates the "Minute" and the last 2-digit indicates the "second" For example "9960", it means the available time is 99 minutes and 60 seconds.
2. In Single Picture mode, 4-digit number appears. It means the maximum number of picture can be shot. The number will decrease one by one with each shooting.
Note:
The actual number of recording time and Picture depends on the memory capacity.