Our factory specilized in carbide milling cutter, which including square end mill, ball nose end mill, corner radius end mill, for aluminum processing end mill and other special tools.
HRC ≤55 degree
Coating: ALTIN
Cobalt: 12%
Helix angle: 35 degree
Micro grain: 0.6 um
Raw material imported from USA
It mainly used for machining steel.
Welcome to contact us at any time
HRC ≤55 degree
Coating: ALTIN
Cobalt: 12%
Helix angle: 35 degree
Micro grain: 0.6 um
Raw material imported from USA
It mainly used for machining steel.
Welcome to contact us at any time
| Outside diameter(D) | Shank diameter(D) | Flute length(L) | Overall length(L) |
| 1.0 | 4 | 5 | 75 |
| 1.5 | 4 | 6 | 75 |
| 2.0 | 4 | 9 | 75 |
| 2.5 | 4 | 10 | 75 |
| 3.0 | 4 | 15 | 75 |
| 3.5 | 4 | 15 | 75 |
| 4.0 | 4 | 20 | 75 |
| 4.5 | 6 | 20 | 75 |
| 5.0 | 6 | 25 | 75 |
| 5.5 | 6 | 25 | 75 |
| 6.0 | 6 | 25 | 75 |
| 6.5 | 8 | 25 | 75 |
| 7.0 | 8 | 25 | 75 |
| 7.5 | 8 | 25 | 75 |
| 8.0 | 8 | 30 | 75 |
| 4.0 | 4 | 25 | 100 |
| 3.0 | 6 | 15 | 100 |
| 4.0 | 6 | 25 | 100 |
| 5.0 | 6 | 30 | 100 |
| 6.0 | 6 | 30 | 100 |
| 7.0 | 8 | 35 | 100 |
| 8.0 | 8 | 35 | 100 |
| 9.0 | 10 | 40 | 100 |
| 10.0 | 10 | 40 | 100 |
| 11.0 | 12 | 45 | 100 |
| 12.0 | 12 | 45 | 100 |
| 8.0 | 8 | 40 | 150 |
| 10.0 | 10 | 50 | 150 |
| 12.0 | 12 | 50 | 150 |
| 16.0 | 16 | 70 | 150 |
| 18.0 | 20 | 80 | 150 |
| 20.0 | 20 | 80 | 150 |