1.Be controlled by the VDU touch-screen that can input, store, and display the tube data and instruments.
2.The movements of the each axis(Y,B,C,Z)are accurately driven and controlled by IPC. So the machine can bend tube with mandrel and lubricate automatically,.
3.It has the functions of bending spring-back repair, faults self-diagnose, store without electric-power, and safe protection.
4.The accuracy of axis B and axis C is ±0.05°,and the accuracy of Y axis is ±0.1mm. also the machine can work with a tube measuring machine .
2.The movements of the each axis(Y,B,C,Z)are accurately driven and controlled by IPC. So the machine can bend tube with mandrel and lubricate automatically,.
3.It has the functions of bending spring-back repair, faults self-diagnose, store without electric-power, and safe protection.
4.The accuracy of axis B and axis C is ±0.05°,and the accuracy of Y axis is ±0.1mm. also the machine can work with a tube measuring machine .
| Specification/Model | WFCNC10 | ||
| Max. bending capacity(mm) | Φ10x1.25 | ||
| Min. bending capacity(mm) | Φ3 | ||
| Max. bending radius(mm) | 40 | ||
| Min. bending radius(mm) | 3 | ||
| Max. bending angle | 190 | ||
| Length of mandrel(mm) | 1800 | ||
| Mandrel stroke(mm) | 40 | ||
| Mandrel adjustment(mm) | 20 | ||
| Follower die stroke(mm) | 187 | ||
| Pipe end Min. length(mm) | 50 | ||
| Tools centerline height(mm) | 10 | ||
| Working height(mm) | 1015 | ||
| Speed range | Bending speed C(r/min) | 0-50 | |
| Feeding trolley walking speed Y(r/min) | 0-90 | ||
| Clamping set speed B(r/min) | 0-70 | ||
| Pre-set speed(each axis-CNC) | 9 | ||
| Working accuracy | Bending accuracy C axis(°) | ±0.05 | |
| Feeding accuracy Y axis(°) | ±0.1 | ||
| Rotary accuracy B axis(°) | ±0.05 | ||
| Capacity of memory | 10^5 | ||
| C-axis stall torque(N.m) | 93 | ||
| Motor power (KM) | 3 | ||
| Hydraulic system pressure(Mpa) | 15 | ||
| Hydraulic tank capacity(L) | 150 | ||
| Dimensions: L*W*H(m) | 3.1*0.91*1.36 | ||