Hover Heat Transfer Press Sublimation Machine
Description:
The Hover Heat Press has all of the features of the Auto Open Clam with one unique difference: The upper platen hovers over the garment to ensure brighter colors and a stronger bond between ink and the garment.
With this breakthrough technology, you never have to worry about direct-to-garment ink residue on your platen. Can also be used for any type of traditional heat-applied graphics.
Feature:
Magnetic Assist Lock Down
Available size: 38x38cm, 40x50cm
Auto Open Feature
Digital Time & Temperature Controls
Cycle Counter for Tracking Production Quantities
Two modes - one for contact and the second for pressure
Generates maximum pressure
Under-center pressure platen
CE approved
Quick-change lower platen
Non-stick coated heater - stress relieved to prevent warping
Cast-in tubular element every 2.5" to eliminate cold spots
3/16" laser-quality Iron framework
Heavy-duty pin & bushing pivot points
3/4" upper flotation heat platen
Wide opening for easy layout
Available in 110v or 220v
Space-saving clamshell design
Specially designed for curing ink
Specification:
Machine Type: Hover, Auto Release, Clamshell
Platen Size: 15"*15"/16"*20"
(38*38cm/40*50cm)
Controller: GY-06 Digital Time & Temp. Control
· Cycle Counter for Tracking Production Quantities
· Cycle Done Alarm
Magnetic Assist Lock Down System
Max. Hover Space: Up to 10mm
Printable Articles: Up to 5mm Thickness
Opening Angle: 50 degrees
Gas Spring Control: Yes
Voltage: 120V/ 220V
Power: 1750W/ 1800W
Time Range: 0-999 sec
Maximum Temp: 225 C
Temperature Accuracy: ± 0.5%
Packing Size: 54*88*57cm
Gross Weight: 60kg
Heat Platen Test:
Each Single Copper sheathed heating rod is tested before it is cast in an aluminum alloy or Mica Sheet. These heating rods are comparable to those found in industrial ovens that heat up quickly, work efficiently and last many years. With our industrial quality heat castings, you can get five years worry free warranty.
Quality Control on Finished Machine:
All Microtec heat presses are strictly tested under the following procedures before shipping out.
1) Turn on the machine, let it heating up to 200 degree Celsius.
2) Keep the temperature stay at 200 degree Celsius for at least 20 minutes
Package:
The machine is packed in strong carton package and provide with manual.
Machine Warranty:
Microtec's primary service goal is to support all of our customers, could deal with their heat transfer business without interruptions.
So Microtec offers FREE SPARE PARTS with quantity order and the following warranty:
*Free lifetime technical support on all heat presses.
*One-year warranty on entire press & parts.
*Five-year warranty on castings and welds.
*Five-year warranty on heat platen.
*Half- year warranty on mug, plate and cap heaters.
Application
1. Specially designed for curing inks on DTG printed t-shirts.
2. Normal Heat Transfer, Sublimation Transfer Printing.
Description:
The Hover Heat Press has all of the features of the Auto Open Clam with one unique difference: The upper platen hovers over the garment to ensure brighter colors and a stronger bond between ink and the garment.
With this breakthrough technology, you never have to worry about direct-to-garment ink residue on your platen. Can also be used for any type of traditional heat-applied graphics.
Feature:
Magnetic Assist Lock Down
Available size: 38x38cm, 40x50cm
Auto Open Feature
Digital Time & Temperature Controls
Cycle Counter for Tracking Production Quantities
Two modes - one for contact and the second for pressure
Generates maximum pressure
Under-center pressure platen
CE approved
Quick-change lower platen
Non-stick coated heater - stress relieved to prevent warping
Cast-in tubular element every 2.5" to eliminate cold spots
3/16" laser-quality Iron framework
Heavy-duty pin & bushing pivot points
3/4" upper flotation heat platen
Wide opening for easy layout
Available in 110v or 220v
Space-saving clamshell design
Specially designed for curing ink
Specification:
Machine Type: Hover, Auto Release, Clamshell
Platen Size: 15"*15"/16"*20"
(38*38cm/40*50cm)
Controller: GY-06 Digital Time & Temp. Control
· Cycle Counter for Tracking Production Quantities
· Cycle Done Alarm
Magnetic Assist Lock Down System
Max. Hover Space: Up to 10mm
Printable Articles: Up to 5mm Thickness
Opening Angle: 50 degrees
Gas Spring Control: Yes
Voltage: 120V/ 220V
Power: 1750W/ 1800W
Time Range: 0-999 sec
Maximum Temp: 225 C
Temperature Accuracy: ± 0.5%
Packing Size: 54*88*57cm
Gross Weight: 60kg
Heat Platen Test:
Each Single Copper sheathed heating rod is tested before it is cast in an aluminum alloy or Mica Sheet. These heating rods are comparable to those found in industrial ovens that heat up quickly, work efficiently and last many years. With our industrial quality heat castings, you can get five years worry free warranty.
Quality Control on Finished Machine:
All Microtec heat presses are strictly tested under the following procedures before shipping out.
1) Turn on the machine, let it heating up to 200 degree Celsius.
2) Keep the temperature stay at 200 degree Celsius for at least 20 minutes
Package:
The machine is packed in strong carton package and provide with manual.
Machine Warranty:
Microtec's primary service goal is to support all of our customers, could deal with their heat transfer business without interruptions.
So Microtec offers FREE SPARE PARTS with quantity order and the following warranty:
*Free lifetime technical support on all heat presses.
*One-year warranty on entire press & parts.
*Five-year warranty on castings and welds.
*Five-year warranty on heat platen.
*Half- year warranty on mug, plate and cap heaters.
Application
1. Specially designed for curing inks on DTG printed t-shirts.
2. Normal Heat Transfer, Sublimation Transfer Printing.