S&K SKCL-3725A CNC Automatic Glass Cutting Machine Production Line (Glass Cutting Machine)
The software is "Optima" original from Italy.
SKCL-3725A CNC AUTOMATIC GLASS CUTTING PRODUCTION LINE.
including:
Automatic Glass Loading Machine - SKLM-3725A (3660mm x 2440mm)
CNC Cutting Table with Belt-transfer - SKC-3725A (3660mm x 2440mm)
Breaking Machine - SKB-4030 (4000mm x 3000mm)
Work flow:
After starting the inputting machine, arms automatically suck glass from the shelf. Under sensor controlled, glass automatically find edge in the X and Y directions.
After moving to the designated location, transport glass to the CNC cutting table. Under laser sensory element guidance, use laser-reader to get the position of the glass-sheet. Cutter will move to coordinate origin, and automatically start to cut according to the preinstall graph.
After cutting, glass will move to the breaking table. Start break bars and to break the glass. At this point, the whole process work was completed.
1. PLC Automatic Glass Loading machine:
Type:SKLM-3725A
Working mode: the loading is driven by the gear-motor, and run on the rail
Max glass weight: 1000kg
Max glass size:3660mm×2440mm
Working circle time 1ST : station>35sec
Workingstation:1working stations in one side
Required power:10KW/380V
Required pressure:0.6MPa,dry and instant
Others (PLC Automatic Glass Loading machine):
Hydraulic system:the hydraulic motor is made by "ABB", the hydraulic pump and valves
are made in Japan, the brand is "Yuken";
Transfer system:Use the motor and gear reducer;
Pneumatic system:All the pneumatic parts is make from "SMC";
Electrical parts:All the electrica l parts is made from"SIEMENZ",the PLC is made from
"OMRON";
2. CNC Glass Cutting table with belt-transfer
Type:SKC-3725A
Max glass size:3660mm×2440mm
Glass thickness:2mm-22mm
Max speed:120m/min
Cutting precision:±0.20mm/2000m
Function:
1. The glass sheet is transferred by the conveyer belt;
2. The glass sheet is positioned by the electrical device;
Required power:10KW/380V
Required pressure:0.6MPa,dry and instant
Others(CNC Glass Cutting table with belt-transfer):
Electrical parts:All the electrical parts and is made from"Siemens",
The servo motor is made by "Panasonic";
Racks and uider:KHK, made in Japan;
The table top is covered by the antistatic felt
Pneumatic system:All the pneumatic parts is make from "SMC";
Motion controller(CNC): "TRIO", made in England
Optimizing software: "OPTIMA", made in Italy
Processing Software: Auto Cad
3. Glass Breaking Machine
Type:SKB-4030C
Max glass sheet size:4000×3000mm
Thickness of the glass sheet:2-22mm
Break bars:1+2
Required power:8KW/380V
Required pressure:0.6MPa,dry and instant
The software is "Optima" original from Italy.
SKCL-3725A CNC AUTOMATIC GLASS CUTTING PRODUCTION LINE.
including:
Automatic Glass Loading Machine - SKLM-3725A (3660mm x 2440mm)
CNC Cutting Table with Belt-transfer - SKC-3725A (3660mm x 2440mm)
Breaking Machine - SKB-4030 (4000mm x 3000mm)
Work flow:
After starting the inputting machine, arms automatically suck glass from the shelf. Under sensor controlled, glass automatically find edge in the X and Y directions.
After moving to the designated location, transport glass to the CNC cutting table. Under laser sensory element guidance, use laser-reader to get the position of the glass-sheet. Cutter will move to coordinate origin, and automatically start to cut according to the preinstall graph.
After cutting, glass will move to the breaking table. Start break bars and to break the glass. At this point, the whole process work was completed.
1. PLC Automatic Glass Loading machine:
Type:SKLM-3725A
Working mode: the loading is driven by the gear-motor, and run on the rail
Max glass weight: 1000kg
Max glass size:3660mm×2440mm
Working circle time 1ST : station>35sec
Workingstation:1working stations in one side
Required power:10KW/380V
Required pressure:0.6MPa,dry and instant
Others (PLC Automatic Glass Loading machine):
Hydraulic system:the hydraulic motor is made by "ABB", the hydraulic pump and valves
are made in Japan, the brand is "Yuken";
Transfer system:Use the motor and gear reducer;
Pneumatic system:All the pneumatic parts is make from "SMC";
Electrical parts:All the electrica l parts is made from"SIEMENZ",the PLC is made from
"OMRON";
2. CNC Glass Cutting table with belt-transfer
Type:SKC-3725A
Max glass size:3660mm×2440mm
Glass thickness:2mm-22mm
Max speed:120m/min
Cutting precision:±0.20mm/2000m
Function:
1. The glass sheet is transferred by the conveyer belt;
2. The glass sheet is positioned by the electrical device;
Required power:10KW/380V
Required pressure:0.6MPa,dry and instant
Others(CNC Glass Cutting table with belt-transfer):
Electrical parts:All the electrical parts and is made from"Siemens",
The servo motor is made by "Panasonic";
Racks and uider:KHK, made in Japan;
The table top is covered by the antistatic felt
Pneumatic system:All the pneumatic parts is make from "SMC";
Motion controller(CNC): "TRIO", made in England
Optimizing software: "OPTIMA", made in Italy
Processing Software: Auto Cad
3. Glass Breaking Machine
Type:SKB-4030C
Max glass sheet size:4000×3000mm
Thickness of the glass sheet:2-22mm
Break bars:1+2
Required power:8KW/380V
Required pressure:0.6MPa,dry and instant
| Overall Size (L x W x H) | 7000x1000x2500mm |
| Thickness of the processing glass | 3-25mm |
| Max. beveling width | 40mm |
| Min. processing size | 100 x 100mm |
| Weight | 4Tons |
| Voltage | 380V or 415V / 50Hz |
| Power | 20KW |