Description:
Laser barcode scanner, handheld barcode reader,
Model No.: SGT- 2208,
Parameter of HandHeld Laser barcode scanner, barcode reader, Electrical specifications
Voltage requirement: DC 5V
Current concumption: Max 60mA
Idle current: 20mA
Optical specifications
Light source 670nm
Scan method vibrating mirror
Scan rate: 200 scans/sec
Decode rate 300 decodes/sec
Reading pitch angle +60°
Reading skew angle +30°
Reading rotation angle 15°
Reading width 36cm
Identification
Supported barcode symbologies:
ChinesePost; Codebar; Code39; Code128, Ean8; Ean13, Ean128; ISBN; ISSN; Industrial 2of5, Interleaved 2of5; MSI/Plessey; UPC.
CPU: ARM 32 bit Cortex,
Scanning Speed: 200 scans/sec, high speed Scanner
( Switchable between trigger mode and autosense mode )
To Keep pressing the trigger button for 5 seconds can change the scanner from trigger
Mode to autosense mode or from autosense mode to trigger mode, to fit your different
Scanning mode.
Your best POS solution provider !!!
Laser barcode scanner, handheld barcode reader,
Model No.: SGT- 2208,
Parameter of HandHeld Laser barcode scanner, barcode reader, Electrical specifications
Voltage requirement: DC 5V
Current concumption: Max 60mA
Idle current: 20mA
Optical specifications
Light source 670nm
Scan method vibrating mirror
Scan rate: 200 scans/sec
Decode rate 300 decodes/sec
Reading pitch angle +60°
Reading skew angle +30°
Reading rotation angle 15°
Reading width 36cm
Identification
Supported barcode symbologies:
ChinesePost; Codebar; Code39; Code128, Ean8; Ean13, Ean128; ISBN; ISSN; Industrial 2of5, Interleaved 2of5; MSI/Plessey; UPC.
CPU: ARM 32 bit Cortex,
Scanning Speed: 200 scans/sec, high speed Scanner
( Switchable between trigger mode and autosense mode )
To Keep pressing the trigger button for 5 seconds can change the scanner from trigger
Mode to autosense mode or from autosense mode to trigger mode, to fit your different
Scanning mode.
Your best POS solution provider !!!
| Parameter of HandHeld Laser barcode scanner, barcode reader, Electrical specifications | |||||
| Model No.: | SGT- 2208, | ||||
| Voltage requirement: | DC 5V | ||||
| Current concumption: | Max 60mA | ||||
| Idle current | 20mA | ||||
| Light source | 670nm | ||||
| Scan method vibrating mirror | |||||
| Scan rate | 120 scans/sec | ||||
| Decode rate | 300 decodes/sec | ||||
| Reading pitch angle | 60° | ||||
| Reading skew angle | 30° | ||||
| Reading rotation angle | 15° | ||||
| Reading width | 36cm | ||||
| Supported barcode symbologies: |
ChinesePost; Codebar; Code39; Code128, Ean8; Ean13, Ean128; ISBN; ISSN; Industrial 2of5, Interleaved 2of5; MSI/Plessey; UPC. |
||||
| Trigger mode: | Manual, auto-trigger, auto sense. | ||||
| Configuration: | Over300 parameters can be set by RS232 or menu book | ||||
| Available interfaces: | Keyboard Wedge: XT/AT and PS2, RS232, USB | ||||
| Environmental specifications |
Temperature in operation 0-40° Temperature in storage -10-60° |
||||
| Humidity in storage | 20-80% | ||||
| Ambient fluorescent light | 20-90% | ||||
| Dimensions | (l× W× D) 70× 70× 170mm | ||||
| Case material | ABS; PS; PC | ||||
| Weight body | 145g(excl. Cable) | ||||
| Cable length | 2m | ||||
| Connector keyboard wedge miniDIN6 | |||||
| Connector RS232 dB9(MALE) | |||||
| Connector USB USB-A(2.0) | |||||
Ambient incandescent light rejection 50.0lux max
|
|||||
| Shock drop test 1.5m drop onto concrete surface | |||||
| Shock vibration test 12-100Hz with 2G for 1 hour | |||||