Model: RCM-1201C
Needles: 12
Head(s): 1
Net Weight: 290 kgs. / 638 lbs.
E. M. R. Area: 450 X 450 mm (17.7 X 17.7 in. )
Machine Size: 126 X 130 X 174 cm (50 X 51 X 69 in)
Main features:
12 needles, one head, suitable for flat bed embroidery, cap embroidery and finished garments embroidery
Embroidery area: 450 X 450 mm, or 17.7" X 17.7"
Automatic thread trimmer
Maximum speed 850SPM
270 wide cap frame
USB port ready
Auto color change
Thread break detection
Pre-Sew Design Trace capable
Memory stitches: 2, 000, 000 stitches
Electricity: 110V/60Hz or 220V/50Hz available
Start, Stop, and Emergency Stop
Unique synchronized trimming system assures a quiet working condition. Meanwhile, the angle of
The movable knife can be adjusted without changing the mechanic system. And also, the thread length after trimming can be adjusted through control panel. The machine will not get jammed after trimming, which often happens on machines with solenoid trimming system
Newly developed small arm guarantees a better embroidery quality on caps with 2mm space reduced between the cap device and the needle plate
Newly developed small arm in only 70% of the old design, which guarantees a wide range of embroidery
Materials, like shirt pockets and trousers' legs.
Control panel functions:
Color LCD display showing real time stitching
Function keys including Menu, SPeed up and Slow down (also Page Up and Page Down), Help, Floppy Input, Parameter Settings, Clear, ESC, Enter, etc.
Numeric keys for selection of needles
Frame-moving keys
Manual Trimming
Manual Color Change
Embroidery Status
Embroidery Method
DOT Key to return to 100 degrees
Frames/hoops included:
1 flat-bed sash frame per machine
2 sets of square hoops for 30cm X 30cm (12.0" X 12.0") for each head
2 sets of round hoops of 19cm (9.0") for each head
2 sets of round hoops of 15cm (5.9") for each head
2 sets of round hoops of 12cm (4.7") for each head
2 sets of round hoops of 9cm (3.5") for each head
Cap attachment included:
2 cap rings per head that snap into cap station for preparation and then embroidery
1 hoop station per machine for easy snap in & snap out preparation of caps
1 cap driver per head that snaps into embroidery machine's bracket holder for hoops.
Accessories included:
Table top
Operation Manual
Tool Kit
Bobbin Winder
Options device:
Sequin device
Double sequin device
Boring device
Cording device
Belt hoop
Laser trace device
8 in 1 device
Options
Introductory starter kit
8000 plus per-digitized stock designs
Digitizing, Lettering and Editing Software
Shirt hooping station
Full size thread cones
Needles: 12
Head(s): 1
Net Weight: 290 kgs. / 638 lbs.
E. M. R. Area: 450 X 450 mm (17.7 X 17.7 in. )
Machine Size: 126 X 130 X 174 cm (50 X 51 X 69 in)
Main features:
12 needles, one head, suitable for flat bed embroidery, cap embroidery and finished garments embroidery
Embroidery area: 450 X 450 mm, or 17.7" X 17.7"
Automatic thread trimmer
Maximum speed 850SPM
270 wide cap frame
USB port ready
Auto color change
Thread break detection
Pre-Sew Design Trace capable
Memory stitches: 2, 000, 000 stitches
Electricity: 110V/60Hz or 220V/50Hz available
Start, Stop, and Emergency Stop
Unique synchronized trimming system assures a quiet working condition. Meanwhile, the angle of
The movable knife can be adjusted without changing the mechanic system. And also, the thread length after trimming can be adjusted through control panel. The machine will not get jammed after trimming, which often happens on machines with solenoid trimming system
Newly developed small arm guarantees a better embroidery quality on caps with 2mm space reduced between the cap device and the needle plate
Newly developed small arm in only 70% of the old design, which guarantees a wide range of embroidery
Materials, like shirt pockets and trousers' legs.
Control panel functions:
Color LCD display showing real time stitching
Function keys including Menu, SPeed up and Slow down (also Page Up and Page Down), Help, Floppy Input, Parameter Settings, Clear, ESC, Enter, etc.
Numeric keys for selection of needles
Frame-moving keys
Manual Trimming
Manual Color Change
Embroidery Status
Embroidery Method
DOT Key to return to 100 degrees
Frames/hoops included:
1 flat-bed sash frame per machine
2 sets of square hoops for 30cm X 30cm (12.0" X 12.0") for each head
2 sets of round hoops of 19cm (9.0") for each head
2 sets of round hoops of 15cm (5.9") for each head
2 sets of round hoops of 12cm (4.7") for each head
2 sets of round hoops of 9cm (3.5") for each head
Cap attachment included:
2 cap rings per head that snap into cap station for preparation and then embroidery
1 hoop station per machine for easy snap in & snap out preparation of caps
1 cap driver per head that snaps into embroidery machine's bracket holder for hoops.
Accessories included:
Table top
Operation Manual
Tool Kit
Bobbin Winder
Options device:
Sequin device
Double sequin device
Boring device
Cording device
Belt hoop
Laser trace device
8 in 1 device
Options
Introductory starter kit
8000 plus per-digitized stock designs
Digitizing, Lettering and Editing Software
Shirt hooping station
Full size thread cones