Standard:AATCC 93
Description:
This tester is applicable to detect textiles and other flexible material abrasion resistance.
Working principle:
Free state fabric samples under the drive of the impeller, along the circular orbit in cylindrical test box to zigzag. Sample and test box wall and friction liner hit repeatedly, continuous is very fast at the same time, the impact of the high-speed rotating impeller. In the process of test, the sample is flexure, friction, impact and extrusion, stretching and other mechanical action. The entire sample yarn and yarn, fiber and fiber, also produce between surface and surface and abrasive wear. When the sample in a line at the fracture worn by the mass loss of the sample or specimen grab strength loss assessment wear textiles.
Specifications:
Speed: 3500 r / min
Impeller: S shape, length 114mm
Timer: 0.1s ~ 99H
Test case: Diameter 140mm, 70mm depth
Volume (WxDxH): 465x204x306cm
Weight (approx.): ≈18Kg
Power: 1∮ AC 220V 50Hz 3A
Accessories:
Ring insert (optional): plastic material, polyurethane foam lined with 3.2mm
Liner (optional): 500J / 240J blasted aluminum fabric
Auxiliary tool (optional):
Cotton fabric (optional): Density is 80"x80" prints (carded cotton yarn), width 1.2, about 8m/kg, bleaching desizing, without living blue, fluorescent whitening or finishing off the material
Speedometer (optional)
Vacuum cleaner (optional)
Serrated scissors (optional)
Balance (optional): Accuracy ± 0.001g
Strength tester (optional)
Description:
This tester is applicable to detect textiles and other flexible material abrasion resistance.
Working principle:
Free state fabric samples under the drive of the impeller, along the circular orbit in cylindrical test box to zigzag. Sample and test box wall and friction liner hit repeatedly, continuous is very fast at the same time, the impact of the high-speed rotating impeller. In the process of test, the sample is flexure, friction, impact and extrusion, stretching and other mechanical action. The entire sample yarn and yarn, fiber and fiber, also produce between surface and surface and abrasive wear. When the sample in a line at the fracture worn by the mass loss of the sample or specimen grab strength loss assessment wear textiles.
Specifications:
Speed: 3500 r / min
Impeller: S shape, length 114mm
Timer: 0.1s ~ 99H
Test case: Diameter 140mm, 70mm depth
Volume (WxDxH): 465x204x306cm
Weight (approx.): ≈18Kg
Power: 1∮ AC 220V 50Hz 3A
Accessories:
Ring insert (optional): plastic material, polyurethane foam lined with 3.2mm
Liner (optional): 500J / 240J blasted aluminum fabric
Auxiliary tool (optional):
Cotton fabric (optional): Density is 80"x80" prints (carded cotton yarn), width 1.2, about 8m/kg, bleaching desizing, without living blue, fluorescent whitening or finishing off the material
Speedometer (optional)
Vacuum cleaner (optional)
Serrated scissors (optional)
Balance (optional): Accuracy ± 0.001g
Strength tester (optional)
| Test speed: | 3,000rpm/minute |
| S-shape rotor: | 114mm |
| Test cylinder: | Diameter: 140mm; Depth: 70mm |
| Timer: | 0.1 second to 99 hours, stops automatically |
| Dimensions(WxDxH): | 465x204x306mm |
| Weight: | 18kg, 40lbs |