Specifications
Glass thickness: 3-30mm
Hole diameter: 5-80mm
Laser location for option
Munti-hold drill
PLC control glass drilling machine
1. Two drilling spindles, one at the lower side and another upper. When the glass is put on the table, it is fixed pneumatically and the lower spindle will rise up automatically to drill from the bottom side if the glass. Then the upper spindle will drill the top side of the glass and thus, the hole is drilled through.
2. The cooling water runs inside the core drill so that the cooling effect is directly acted onto the glass without any loss.
3. Tapping or chamfering can be made on the hole for particularly purpose.
4. The spindle design is sophisticated such that it is strong enough for 24 hours running a day. The rigid and anticorrosive spindle enables maintenance free.
5. Customer designed drilling machine available. With extra diameter, glass size.
Advantage
Adopts PLC control and Oil pressure buffer technologe
Aligning and Auto compensation
Operation can be a single cycle, continuous cycle
Fast drilling with high quality
Movable coordinate location, High precision of perforation pitch
Able to install laser position location
| Model Number | YD-HD-5/80A |
| Distance from hole center to C-stand (mm) | 1250 |
| Hole diameter(mm) | 4~80 |
| Glass thickness(mm) | 3~30 |
| Concentric tolerance(mm) | ±0.2 |
| Compressed air consumption (IT/min) | 0.6 |
| Pressure (kg/cm 2) | 8 |
| Power (kw) | 3.85 |
| Outer dimention (m) | 2150*2500*1750mm |
| Weight (kg) | 1000 |