Why rapid prototyping
Prototypes allow the design team to test for functionality and ensure design and fit is correct.
The prototypes can be used for sales meetings, customer presentations, and tradeshows overall time-to-market can be reduced since accuracy in design assures a streamlined project timeline.
CNC Prototypes Advantage
1. Machine many materials that is economically available to choosing.
2. Typical accuracy is +/-0.1mm. Ability to hold tight tolerances and high precision.
3. The cost be cheaper than even SLA, SLS, FDM rapid prototypes depending on the geometry.
Silicone Mould & Small batch producion
Silicone mould can be produced from the master made by the RP. After finished the CNC sample, Be sanded and polished to the Surface finished required of the part, than in turn to make the Rapid silicone mould.
Its application is mainly to produce plastics in small batch by vacuum and gravity casting method. The materials normally used are PU Epoxy. The batch size is from several pieces to over hundreds.
Color matched to Pantone or supplied sample.
Silicone: Dow Corning T4 from USA
Resins: ABS resin, PP resin, Nylon resin, Rubber resin, PMMA resins, POM resin
Silicone Mold Advantage:
1. Fast tooling, normal 1 to 2 days to complete the mould.
2. Fine details can be copied
3. Easy to release parts from the mould due to the non-stick property of the silicone rubber.
4. Good surface finish.
Finishing service
We operates a full finishing painting and texturing service.
Prototypes can be dressed in accordance with customer requirements.
Prototypes allow the design team to test for functionality and ensure design and fit is correct.
The prototypes can be used for sales meetings, customer presentations, and tradeshows overall time-to-market can be reduced since accuracy in design assures a streamlined project timeline.
CNC Prototypes Advantage
1. Machine many materials that is economically available to choosing.
2. Typical accuracy is +/-0.1mm. Ability to hold tight tolerances and high precision.
3. The cost be cheaper than even SLA, SLS, FDM rapid prototypes depending on the geometry.
Silicone Mould & Small batch producion
Silicone mould can be produced from the master made by the RP. After finished the CNC sample, Be sanded and polished to the Surface finished required of the part, than in turn to make the Rapid silicone mould.
Its application is mainly to produce plastics in small batch by vacuum and gravity casting method. The materials normally used are PU Epoxy. The batch size is from several pieces to over hundreds.
Color matched to Pantone or supplied sample.
Silicone: Dow Corning T4 from USA
Resins: ABS resin, PP resin, Nylon resin, Rubber resin, PMMA resins, POM resin
Silicone Mold Advantage:
1. Fast tooling, normal 1 to 2 days to complete the mould.
2. Fine details can be copied
3. Easy to release parts from the mould due to the non-stick property of the silicone rubber.
4. Good surface finish.
Finishing service
We operates a full finishing painting and texturing service.
Prototypes can be dressed in accordance with customer requirements.
| Prototyping Solution | Material | Tolerance |
| Computer Numerical Control (CNC) | Any material that is commercially available in stock sizes. A wide variety of plastic and metal material options.ABS,PMMA,POM,PP,PU,PC,PA66,PMMA,PVC,PVE, aluminum Zinc alloy, copper, iron, steel. | +/- 0.005" |
| Fused Deposition Modeling (FDM) | production-quality ABS, ABS-M30 Polycarbonate PC-ABS PC-ISOULTEM, & PPSF | +/- 0.002" |
| Low Volume production(Silicone Mould /vacuum casting) | ABS,PP,PC,PMMA,POM,Nylon ,PU and so on | +/- 0.003" |
| Precision low volume production(injection molding) | ABS,PMMA,POM,PP,PU,PC,PA66,PMMA,PVC,PVE, | +/- 0.001" |
| Metal prototypes(CNC,EDM,Drilling, Milling) | Aluminum, Stainless Steel, Carbon Steel, 17-7 PH, Brass, Phosphor Bronze, Copper, Nickel Alloys, Beryllium Copper,metal and plastic rapid prototype | +/-0.005" |
| Stereolithography (SLA) | Technician's Choice, Semi-Flexible, PE-Like Durable, PP-Like,ABS-Like High-Impact ABS-Like Rigid, PC-Like High-Temp ABS-Like High Resolution | +/- 0.002" |
| Selective Laser Sintering (SLS) | Nylon, Glass-Filled Nylon, Flame Retardant Nylon and Durable Nylon. |
+/- 0.005" Layer Thickness: 0. 004". |
| 3D Printing | ABS or PLA. Fast to print the model within 1~2hours | +/- 0.003" |
|
Surface Treatment: |
- Can be painted in any color with silk LOGO - Semi-transparent & 100% transparent - Laser engraving marks on surfaces - Anodizing - Electroplating - Painting - Chrome plating - Powder coating (Sand blasted) |
Proper for plastic and metal parts |