XGF18-18-6 PET bottle Washing / filling / capping machine is a three-in-one combination of our advanced technology of atmospheric pressure filling technique, and it is the application of independent research and development, it will be the same with pure water and mineral water advanced bottling models. This machine adopts conveying way for clip bottles' lips, only need to replace very few parts, it can be applied to a variety of bottle type, smooth delivery. Filling method is Atmospheric pressure filling.
1. Rotary Washing Part
The number of washing bottle chucks is 18, the washing clamp hands are stable and reliable with high efficiency.
2. Filling Part
The number of filling valve is 18, the connected parts are consisted of 304 stainless steel. The External and internal surface of the filling cylinder is dealt with mirror-polishing.
3. Rotary Capping Part
The number of rotary capping heads is 6,
The level rotary capping device, with no damaging on the surface of the cap and automatically send signals to add caps when few caps in the funnel.
4. Main Technical Parameters:
(1)Capacity: 4000-6000bottles/hours(500ml)
(2)Bottle DiameterΦ 50~95mm
(3)Bottle height: 150~320mm
(4)Cap specification: Standard plastic rib caps
(5)Bottle washing pressure: 0.18~0.25Mpa
(6)Water consumption of bottle washing: 1200kg/h (can be adjusted)
(7)Spraying working position: 10
(8)Gas source pressure: 0.4Mpa
(9)Air consumption: 0.5m3/min
(10)Total Power: 8.63KW
(11)Weight: 3000Kg
(12)Outer Size: 2300× 2300× 2100(mm)
1. Rotary Washing Part
The number of washing bottle chucks is 18, the washing clamp hands are stable and reliable with high efficiency.
2. Filling Part
The number of filling valve is 18, the connected parts are consisted of 304 stainless steel. The External and internal surface of the filling cylinder is dealt with mirror-polishing.
3. Rotary Capping Part
The number of rotary capping heads is 6,
The level rotary capping device, with no damaging on the surface of the cap and automatically send signals to add caps when few caps in the funnel.
4. Main Technical Parameters:
(1)Capacity: 4000-6000bottles/hours(500ml)
(2)Bottle DiameterΦ 50~95mm
(3)Bottle height: 150~320mm
(4)Cap specification: Standard plastic rib caps
(5)Bottle washing pressure: 0.18~0.25Mpa
(6)Water consumption of bottle washing: 1200kg/h (can be adjusted)
(7)Spraying working position: 10
(8)Gas source pressure: 0.4Mpa
(9)Air consumption: 0.5m3/min
(10)Total Power: 8.63KW
(11)Weight: 3000Kg
(12)Outer Size: 2300× 2300× 2100(mm)
| Configuration List | ||
| No. | Name | Original |
| 1 | Touch screen | Japan Mitsubishi |
| 2 | PLC | Japan Mitsubishi |
| 3 | Transducer | Japan Mitsubishi |
| 4 | Module | Japan Mitsubishi |
| 5 | AC contactor | Schneider |
| 6 | Thermal relay | Schneider |
| 7 | Circuit breaker | Schneider |
| 8 | Circuit breaker | Schneider |
| 9 | Emergency stop switch | Schneider |
| 10 | Power light | Schneider |
| 11 | Potentiometer | Schneider |
| 12 | Communication cable | Domestic |
| 13 | Converter cable | Domestic |
| 14 | Connector bar | Schneider |
| 15 | Connector bar | Schneider |
| 16 | Transducer | Schneider |
| 17 | Photoelectric switch | AUTONICS |