1. The linear rail is adjusted near to be zero-distance, it is suitable for crown and slant cutting. The surface effect is relatively homogeneous.
2. It can reach very high speed with small consumed power. The linear rail has rolling replaced traditional sliding, make it low friction and countermove agile.
3. Can bear the burden from four sides, and it is muti-points contact when carrying load.
4. Easy to assemble and interchange, and its lubricated system is simple to operate and maintenance
5. Small friction losses, long life, high rigidity, high speed feed system.
6. High speed ball screw drives by xyz motor directly, rigidity is added and accuracy is improved.
7. Z axis has a motor brake system. It can keep balance and agility to ensure the machine's accuracy even if when doing fast positioning. (Alternative)
8. Compared with belt transmission, this kind of spindle can reduce noise, lower shake and shatter (alternative).
9. Using linear rails, make the machine has the character of high rigidity, low noise, low abrasion, can move fast and get the optimum circular accuracy.
10. Looped spindle with 4 nozzles around it. The tools and parts can be cooled optimum to promote the processing quality.
2. It can reach very high speed with small consumed power. The linear rail has rolling replaced traditional sliding, make it low friction and countermove agile.
3. Can bear the burden from four sides, and it is muti-points contact when carrying load.
4. Easy to assemble and interchange, and its lubricated system is simple to operate and maintenance
5. Small friction losses, long life, high rigidity, high speed feed system.
6. High speed ball screw drives by xyz motor directly, rigidity is added and accuracy is improved.
7. Z axis has a motor brake system. It can keep balance and agility to ensure the machine's accuracy even if when doing fast positioning. (Alternative)
8. Compared with belt transmission, this kind of spindle can reduce noise, lower shake and shatter (alternative).
9. Using linear rails, make the machine has the character of high rigidity, low noise, low abrasion, can move fast and get the optimum circular accuracy.
10. Looped spindle with 4 nozzles around it. The tools and parts can be cooled optimum to promote the processing quality.
| specification table of heavy cutting guiding machine | |||
| Item | Unit | HS-650H | HS-850H |
| X-axis travel | mm | 600 | 800 |
| Y-axis travel | mm | 500 | 500 |
| Z-axis travel | mm | 500 | 500 |
| Table size | mm | 800x430 | 1,000x500 |
| T-slot number | mm | 4x18x97 | 4x18x97 |
| Max load capacity | kg | 400 | 400 |
| Spindle speed | rpm | 50-10,000 | 50-10,000 |
| Spindle nose to table | mm | 50-550 | 50-550 |
| Spindle motor | kw(HP) | 5.5(7.5) | 5.5(7.5) |
| X/Y Rapid speed | mm/min | 48,000 | 48,000 |
| Z Rapid speed | mm/min | 30,000 | 30,000 |
| X/Y/Z Cutting Feedrate | mm/min | 1-10,000 | 1-10,000 |
| X/Y/Z Servo motor | kw | 2/2/3.5 | 2/2/3.5 |
| Max.tool weight | kg | 6 | 6 |
| MAX.tool length | mm | 200 | 200 |
| Max.tool diameter | mm | 75/150 | 75/150 |
| Contoller | 64S/0i-mc | 64S/0i-mc | |
| Coolant tank capacity | L | 150 | 150 |
| Air source | kg/cm 2 | 6-7 | 6-7 |
| Power requirement | kva | 15 | 15 |
| Machine weight | kg | 5,000 | 5,500 |
| Machine size | mm | 2,200x2,260x2,600 | 2,300x2,120x2,600 |