1. All the series adopt the construction of four-hand rails broad and solid pedestal, strong steel flexibility.
2. Large working panel, offering the utmost working range.
3. With larger motor power than the other machine of the same model, assembled with high precision spindle, reveals the strong capacity of cutting.
4. Suitable height of the working panel, and with front pedals, make it user-friendly, easy to assemble and design the workpieces.
5. Completely sealed metal shield ensure clearance and safety of the working area adopt advanced.
6. All the lubrication adopt advanced pressure removing lubricator, and fitted with aluminum vitta, make it durable and reliance.
7. Use strict German VDI 3441 to do orient precision inspection, the whole course is come and go for 5 times respectively, and then utilizes the statistical data; Completely ensure the product's oriented precision.
8. According to the quality specification ISO9001 to ensure the product's quality.
9. Appearance: According to the biomechanics facial design, shorted the distance of the operation easily and conveniently.
2. Large working panel, offering the utmost working range.
3. With larger motor power than the other machine of the same model, assembled with high precision spindle, reveals the strong capacity of cutting.
4. Suitable height of the working panel, and with front pedals, make it user-friendly, easy to assemble and design the workpieces.
5. Completely sealed metal shield ensure clearance and safety of the working area adopt advanced.
6. All the lubrication adopt advanced pressure removing lubricator, and fitted with aluminum vitta, make it durable and reliance.
7. Use strict German VDI 3441 to do orient precision inspection, the whole course is come and go for 5 times respectively, and then utilizes the statistical data; Completely ensure the product's oriented precision.
8. According to the quality specification ISO9001 to ensure the product's quality.
9. Appearance: According to the biomechanics facial design, shorted the distance of the operation easily and conveniently.
| specification table of gantry type machining center | |||||
| Item | Unit | HS-3227 | HS-4227 | HS-5227 | |
| Travel X-axis | mm | 3,200 | 4,200 | 5,200 | |
| Travel Y-axis | mm | 2,800 | 2,800 | 2,800 | |
| TravelZ-axis | mm | 1,000 | 1,000 | 1,000 | |
| Spindle center to table surface | mm | 325-1,325 | 325-1,325 | 325-1,325 | |
| Spindle center to vertical column | mm | 450 | 450 | 450 | |
| Distance between two vertical column | mm | 2,700 | 2,700 | 2,700 | |
| Height from working table to the beam | mm | 1,390 | 1,390 | 1,390 | |
| Table size | mm | 3,200x2,050 | 4,200x2,050 | 5,200x2,050 | |
| T-slot number | mm | 22x11x180 | 22x11x180 | 22x11x180 | |
| Max.weight permissible | kg | 12,000 | 14,000 | 16,000 | |
| Spindle speed | rpm | 40-6,000 | 40-6,000 | 40-6,000 | |
| Spindle Taper | # | 50 | 50 | 50 | |
| Reduction ratio(high,low | 1:1,1:4 | 1:1,1:4 | 1:1,1:4 | ||
| Match spindle | Gear type | Gear type | Gear type | ||
| Transmission type | X axis | Planetary gear 1:4 | Planetary gear 1:4 | Planetary gear 1:4 | |
| Y axis | Straight transfer type | Straight transfer type | Straight transfer type | ||
| Z axis | Straight transfer type | Straight transfer type) | Straight transfer type | ||
| Z axis balance weight mode) | Oil pressure | Oil pressure | Oil pressure | ||
| Cutting speed | mm/min | 1-5,000 | 1-5,000 | 1-5,000 | |
| Rapid feed rate | m/min | 10 | 10 | 10 | |
| Dimension of ball screw pitch | mm | X:80/16 Y:63/12 Z:63/12 | X:80/16 Y:63/12 Z:63/12 | X:80/16 Y:63/12 Z:63/12 | |
| Width of line track.track number.slide number | mm | Hard track | Hard track | Hard track | |
| Air source | kg/cm 2 | 6.5 | 6.5 | 6.5 | |
| Machine werght approx | kg | 38000 | 42,000 | 46,000 | |
| Machine size | mm | 8,180x4,920 | 10,180x4,920 | 12,180x4,920 | |