GR series Motor Grader
The XCMG GR series Motor Graders are mainly used in ground leveling, canalling, slope scraping, earthmoving, scarification or snow removal work on road, airfield, farmland, and so on.
They are necessary construction machines for national defense engineering, mine construction, town and country roads building, and farmland improvement.
The articulation frame is adopted and matched with the steering of the front wheel, with small turning radius, maneuvering and flexible.
The electro-hydraulic controls the power shift gearbox, with 6 ahead gears and 3 back gears.
The international matching hydraulic parts are adopted with reliable operation.
The motions of the blade are fully hydraulically controlled.
The rear axle is the three-section driving axle which is provided with the self-locking differential mechanism.
The manipulation table and seats are adjustable. The arrangement of the manipulation handle and instruments are reasonable, with convenient application, and the comfort of driving is improved.
The cab is grand and nice, with wide eyeshot and good sealing.
The front bulldozing plate, rear scarification device, front scarification harrow and automatic leveling device can be added.
Scarifier is for your option.
The XCMG GR series Motor Graders are mainly used in ground leveling, canalling, slope scraping, earthmoving, scarification or snow removal work on road, airfield, farmland, and so on.
They are necessary construction machines for national defense engineering, mine construction, town and country roads building, and farmland improvement.
The articulation frame is adopted and matched with the steering of the front wheel, with small turning radius, maneuvering and flexible.
The electro-hydraulic controls the power shift gearbox, with 6 ahead gears and 3 back gears.
The international matching hydraulic parts are adopted with reliable operation.
The motions of the blade are fully hydraulically controlled.
The rear axle is the three-section driving axle which is provided with the self-locking differential mechanism.
The manipulation table and seats are adjustable. The arrangement of the manipulation handle and instruments are reasonable, with convenient application, and the comfort of driving is improved.
The cab is grand and nice, with wide eyeshot and good sealing.
The front bulldozing plate, rear scarification device, front scarification harrow and automatic leveling device can be added.
Scarifier is for your option.
| Model | GR165 | ||
| Basic specification | |||
| Engine model | 6BTA5.9/SC8D170G2B1 | ||
| Rated power/speed | kw/rpm | 125/2200 | |
| Dimension (LxWxH) | MM | 8900x2625x3470 | |
| Operating weight | kg | 15000 | |
| Performance specification | |||
| Travelling speed,forward | km/h | 5,8,11,19,23,38 | |
| Travelling speed,reverse | km/h | 5,11,23 | |
| Tractive force | kN | 82 | |
| Max.gradeability | % | 30 | |
| Tire inflation pressure | kPa | 260 | |
| Working hydraulic pressure | Mpa | 18 | |
| Transmission pressure | Mpa | 1.3~1.8 | |
| Operating specification | |||
| Max.steering angle of front wheels | ° | left/right 50 | |
| Max.lean angle of front wheels | ° | left/right 17 | |
| Max.oscillation angle of front axle | ° | up/down 15 | |
| Max.oscillation angle of balance box | ° | front/back 15 | |
| Frame articulation angle | ° | left/right 27 | |
| Min.turning radius using articulation | m | 7.3 | |
| Blade | |||
| Max. lift above ground | mm | 450 | |
| Max.depth of cutting | mm | 500 | |
| Max.blade position angle | ° | 90 | |
| Blade cutting angle | ° | 28-70 | |
| Circle reversing rotation | ° | 360 | |
| Moldboard width x height | mm | 3965x610 | |