1.12-tool dynamic turret and C-axis mechanism
(Special accessories)
2. Do milling action on the turning workpiece
12-tool dynamic turret and C-axis mechanism (special accessories)
With C-axis mechanism, the Italy DUPLOMATIC VDI type dynamic turret can do milling action on the turning workpiece to complete all the processing working process for one time, so VDI type tool is easy to disassemble and install tools.
High-precision and high-rigidity spindle
Spindles adopt high-precision NSK P4 class bevel ball bearings to get the maximized span configuration according to the calculation and analyses. High-tech lubricating technology and high rigidity sleeve structure are also adopted to show the best stability and ensure the largest axial rigidity, radial rigidity and machining precision.
Hydraulic cam type turret
Hydraulic 10-tool cam type turret uses rapid tool change, whose adjacent tools change time is 0.25 seconds, and repeat positioning precision is 0.002 mm. Its automatic tool change is to elect handy tools, and manual tool change is to use selective model, in this way you can operate them conveniently and enhance the efficiency.
Laser correction
When guide screws do the screw pitch compensation, the high-precision optical laser equipment ensures that the positioning accuracy of the lathe is the same no matter where the machine is, in this way the accuracy and stability of the processing pieces can be enhanced.
(Special accessories)
2. Do milling action on the turning workpiece
12-tool dynamic turret and C-axis mechanism (special accessories)
With C-axis mechanism, the Italy DUPLOMATIC VDI type dynamic turret can do milling action on the turning workpiece to complete all the processing working process for one time, so VDI type tool is easy to disassemble and install tools.
High-precision and high-rigidity spindle
Spindles adopt high-precision NSK P4 class bevel ball bearings to get the maximized span configuration according to the calculation and analyses. High-tech lubricating technology and high rigidity sleeve structure are also adopted to show the best stability and ensure the largest axial rigidity, radial rigidity and machining precision.
Hydraulic cam type turret
Hydraulic 10-tool cam type turret uses rapid tool change, whose adjacent tools change time is 0.25 seconds, and repeat positioning precision is 0.002 mm. Its automatic tool change is to elect handy tools, and manual tool change is to use selective model, in this way you can operate them conveniently and enhance the efficiency.
Laser correction
When guide screws do the screw pitch compensation, the high-precision optical laser equipment ensures that the positioning accuracy of the lathe is the same no matter where the machine is, in this way the accuracy and stability of the processing pieces can be enhanced.
cnc lathe: Machine specifications | machine accessories | ||||
| machine type | FT-520 | unit | Standard accessories | number | |
| Spindle | Spindle nose type | ANSI A2-6 | Ø32Tool post | 5pieces | |
| Diameter of spindle bore | ø62 | mm | Tool Inclined plate group | 10sets | |
| Diameter of chuck | 8" | Boring cutter ushingsØ8,Ø10, Ø12,Ø16,Ø20,Ø25 | 1set | ||
| Spindle center height to floor | 1067 | mm | Ø32 boring cutter post | 1piece | |
| Spindle center height to front door | 360 | mm | Hard jaw | 1set | |
| FANUC control system | Spindle motor power | 11/15 | kw | Soft jaw | 1set |
| Base spindle speed | 900 | rpm | Bar feeder interface | reserve | |
| Max. spindle speed | 4500 | rpm | 20Radial tool post | 2pieces | |
| Spindle output torque | 52.5 | N-m | Halogen work lamp | 1set | |
| X axis servo motor | 1.8 | kw | Foot switch | 1set | |
| Z axis servo motor | 1.8 | kw | Chip conveyor | 1set | |
| Processing area | Max.swing over bed | ø445 | mm | Work lamp | 1set |
| Max. machining length | 500 | mm | Tool kit, operation manuals | 1set | |
| Max. machining dia. | ø400 | mm | special accessories | ||
| Max. diameter of bar bore | ø52 | mm | Vertical servo tool | 1set | |
| X/Z axis traverse | X axis stroke | 210 | mm | FANUC OiTD controller | 1set |
| Z axis stroke | 520 | mm | Part catcher | 1set | |
| X/Z axis rapid traverse rate | 30 | m/min | Manual measurement tool | 1set | |
| Machine accuracy | X/Z axis repeatability | 0.003 | mm | Automatic measurement tool | 1set |
| Positioning precision | ±0.005 | mm | Bar feeder | 1set | |
| Chip removal | Coolant tank capacity | 150 | liter | High pressure coolant pump | 1set |
| Coolant pressure | 3.5 | bar | Dynamic turret and C-axis | 1set | |
| Tools turret | Tools turret motor | hydraulic motor | SET | ||
| Tool number | 10 | pce | |||
| 4 bearing tool post specifications | 20 | mm | |||
| Boring cutter post specifications | ø32 | mm | |||
| Adjacent tool changing time | 0.25 | sec | |||
| Dimension | L×W×H | 3500*1600*1700 | mm | ||
| Weight | 3900 | kg | |||
| Area(contain chip conveyor) | 5.6 | ||||