The Glass Drilling Machine fixes the glass pneumatically and drill with the upper and lower, double drill bits. The pneumatic working table for supporting large size glass is equipped with high efficiency and easy operation. It is one of the indispensable machines in modern glass industry.
I. Main technical data:
1, Voltage: 380V/50HZ
2, Drilling Diameters: φ 4-φ 200mm
3, Maximum size of Processed glass: 2600× 2400 mm
4, Thickness of processed glass: 3~20 mm
5, Power: 3 Kw Motor: 1.1 Kw
6, Size (L x W x H) 2600 mm× 2600 mm× 1700mm
I. Main technical data:
1, Voltage: 380V/50HZ
2, Drilling Diameters: φ 4-φ 200mm
3, Maximum size of Processed glass: 2600× 2400 mm
4, Thickness of processed glass: 3~20 mm
5, Power: 3 Kw Motor: 1.1 Kw
6, Size (L x W x H) 2600 mm× 2600 mm× 1700mm
| Name | Main specific |
| Frame material | This Frame,adopt high quality casting material, through anneal process, with stable structure, can support large process loading |
| Grinding motor | Adopt LianZhou JIANQIANG brand. |
| water pump | adopt JINGLONG brand |
| Bearing | Adopt HRE brand |
| rotary switch emergency switch | adopt JIANGYIN brand |
| Transformer, low voltage breaker, contactor | adopt JIUCHUAN CHINT brand |
| Equipment acceptance standards | 1, The up and down principal axis proper alignment: Not more thanφ 0.2 tolerance |
| 2, The vertical of the table to the shaft axis line: Within the scope of φ 300 for 0.12 | |
| 3, The radial runout with the center line which are in the taper hole of spindle: 50 around the main spindle position is 0.1 | |
| 4, The error with diameter of the glass hole after processed not more than 0.3mm, and the glass edges not more than 0.5mm |