CNC Lathe Machine (FT-620)FANUC motor
The spindle motor has high power and torque (11/15kw), so that it can process many kinds of material by milling, turning, drilling and indexing precise machining.
VDI dynamic turret processing
This machine adopts high rigidity servo VDI dynamic turret (12 tools), which makes turning and milling compound function achieved. A work piece can be turned, milled, drilled and tapped in the same machine. So clearance error caused by work piece moving can be avoided. Moreover, much time and labors will be saved.
High precision and high rigidity spindle
Spindles adopt high-precision NSK P4 class bevel ball bearings to get the maximized span configuration according to the calculation and analyses, high-tech lubricating technology and high rigidity.
12-tool dynamic turret and C-axis mechanism
VDI type power turret combined with C axis mechanism do milling action on the turning work piece to complete all the processing work for one time and VDI type tool is easy to disassemble and install tools.
Program tailstock (special accessory)
The track of tailstock adopts linear glides with the auxiliary hydraulic cylinder to form the perfect tailstock program, which withstands the work piece in the overall moving way to eliminate moving clearance error caused by the traditional mandrel removal.
Laser correction
When guide screws do the screw pitch compensation, no matter where the machine is, the high-precision optical laser equipment can ensure that the positioning accuracy of the lathe, so the accuracy and stability of the processing pieces can be enhanced
Tool measurement system
(special accessory)
Manual or automatic tool measurement system, can set tool coordinate location, the tool breakage, tool corner wear abrasion, the screen display correction functions to enhance work efficiency.
| Machine specifications | machine accessories | |||||
| machine type | FT-620 | unit | Standard accessories | number | ||
| Spindle | Spindle nose type | ANSI A2-6 | Program tailstock | 1set | ||
| Dia. of spindle bore | ø 77 | mm | Ø 25Tool post | 5pieces | ||
| Dia. of chuck | 10" | Tool Inclined plate group | 10groups | |||
| Spindle center height to floor | 1090 | mm | Boring cutter bushingsØ 8, Ø 10, Ø 12, Ø 16, Ø 20, Ø 25 | 1set | ||
| Spindle center height to front door | 360 | mm | Ø 40boring cutter post | 1piece | ||
| FANUC control system | Spindle motor rating | 11/15 | kw | Hard jaw | 1group | |
| Base spindle speed | 900 | rpm | Soft jaw | 1group | ||
| Max. spindle speed | 3500 | rpm | Bar feeder interface | |||
| Spindle output torque | 52.5 | N-m | ø 25Radial tool post | 2pieces | ||
| X axis servo motor | 1.8 | kw | Halogen work lamp | 1set | ||
| Z axis servo motor | 1.8 | kw | Foot switch | 1set | ||
| Processing area | max. swing over bed | ø 445 | mm | Chip conveyor | 1set | |
| Max. machining length | 650 | mm | Live center(only used for FT-620) | 1set | ||
| Max. machining dia. | ø 400 | mm | Work lamp | 1set | ||
| Max. diameter of bar bore | ø 64 | mm | Tool kit, operation manuals | 1set | ||
| X/Z axis traverse | X axis stroke | 210 | mm | Special accessories | ||
| Z axis stroke | 700 | mm | Vertical servo tool | 1set | ||
| X/Z axis rapid traverse rate | 30 | m/min | FANUC OITD controller | 1set | ||
| Machine accuracy | X/Z axis repeatability | 0.003 | mm | Part catcher | 1set | |
| Positioning precision | ± 0.005 | mm | Manual measurement tool | 1set | ||
| Chip removal | coolant tank capacity | 150 | liter | Automatic measurement tool | 1set | |
| coolant pressure | 3.5 | bar | Bar feeder | 1set | ||
| Tools turret | Tools turret motor | hydraulic motor | SET | High pressure coolant pump | 1set | |
| Tool number | 10 | pce | Dynamic turret and C-axis | 1set | ||
| 4 bearing tool post specifications | 25 | mm | Program tailstock | 1set | ||
| Boring cutter post specifications | ø 40 | mm | ||||
| Adjacent tool changing time | 0.25 | sec | ||||
| Dimension | L× W× H | 3500*1600*1700 | mm | |||
| Weight | 4000 | kg | ||||
| Area(contain chip conveyor) | 5.6 | m² | ||||