Guangzhou DT Exp. & Imp. Co., Ltd.  

Follow0

FT-32M CNC Lathe machine-milling compound machine(Milling and turning machine)

1. FANUC 0I TD Control system
2. Integrated with milling complex functions and C-axis

Specifications
Spindle nose type ANSI A2-5
Diameter of spindle bore Ø 45 mm
Collet chuck CR42A5
Spindle center height to floor 1100 mm Dual tool post(slide gang type) 1 piece
Spindle center height to front door 607 mm 4-sides tool post 1 piece
Draw link operation mode hydraulic motor Side power axis 3 piece
Processing
Area
Max. Swing over bed Ø 360 mm Boring cutter bushings 1 piece
Max. Machining length 210 mm Foot switch 1 piece
Max. Machining dia. Ø 320 mm Work lamp 1 piece
Max. Diameter bar bore Ø 32 mm Tool kit, operation manual 1 set
Control system Spindle motor power 3.7/5.5 kw Automatic lubrication system installed
Base spindle speed 2000 rpm Hydraulic system installed
Max. Spindle speed 6000 rpm Coolant system installed
Spindle output torque 17.7 N-m Brake mechanism installed
X axis servo motor 0.75 kw special accessories
Yaxis servo motor 0.75 kw 3-jaw hydraulic chuck 1 set
Z axis servo motor 0.75 kw Part catcher 1 set
Power tool motor 0.75 kw High pressure coolant pump 1 set
X/Y/Z axis traverse X axis stroke 260 mm Endface power axis 2 set
Z axis stroke 220 mm
Y axis stroke 250 mm
Y axis rapid traverse rate 20 m/min
X/Z axis rapid traverse rate 24 m/min
Machine accuracy X/Y/Z axis repeatability 0.003 mm Any specifications are subject to change without notice in advance.
X/Y/Z Positioning precision ± 0.005 mm
Coolant tank Coolant tank capacity 1000 liter
Coolant pressure 2 kg/c
Turret installation Tool specification ER16
4 bearing tool post specification 16 mm
Boring cutter post specification ø 25 mm
Dimension L× W× H 1900× 1500× 1800 mm
Weight 1800 kg
Area(contain chip conveyor) 2.8 kg/c

Level bed structure
1. The main casting parts are made of meehanite casting with annealing treatment to reduce tension. The machine bed is adopted the level bed structure as this not only would broaden the base of support, but also stabilize the work core. Besides, the design of the machine is reasonable and easy for maintenance.

2. Hush air high speed linear guide rail and hush air ball screw can assure the mechanical system runs in high speed and high precision.
3. Built-in water tank is a complete coolant system which can effectively keep the temperature constant state of the machine, and add the weight of chassis so as to improve the stability of the machine.

Main spindle head structure
1. The main spindle box employs the design of heat distortion to get the high precision and stable cutting. The large span structure of triangle can achieve high stability and high rigidity.
2. C axis has the advantages of higher precision, so it can do 360° Orientation arbitrarily. Coordinate with double cylinder can improve the stability and strong chucking power of the spindle
3. Rotary oil cylinder can clamp work piece automatically with uniform force, besides, the maximum spindle speed is 6000rpm after adopted dynamic balance correction method. Running is smooth, and the high speed and high efficiency can be achieved.

Side milling head (optional)
1. The side milling heads are arranged into a line, and single gear drive structure can do bi-directional rotation, as well as tapping (only uses FANUC servo motor).
2. Dynamic axis uses the NSK bearing which is arranged in the way of two forward and two backward.
Controller and operation panelFT-32M
Controller adopts Japan FANUC Oi TD 8.4 inch crystal screen control system of high stability. 4-axis is linkage with high stability, high-speed and high-precision performance. There is the circuit board module, crystal keys and function keys on operation panel, which makes the operation convenient and prolong service time.