Vertical Machining Center of FMC-1060 is designed for industries which demand high precision and high efficiency. It has been widely used in the processing of various parts, such as accurate mould, automotives, aerospace, and electronics and information industry.The machine is made of high rigidity Meehanite cast iron, and adopts an effective method to estimate the whole structure by finite element computer, which is the advanced technology, brought in the foreign countries.
The 3-axes are driven by powerful servo motor, with which driven ball screw directly, to smooth the round trip of axes and position accuracy.
The 3-axes adopt Taiwan C3 precision ball screw, matched up with the skill of pre-load screw nuts and pre-draw screw bolts, to reduce the effect of temperature changing.
With the structure of wide pedestal and the box structure column, widening and lengthening saddle, the design of heavy load bearing, solidly-structured, the machine can ensure the high load capacity while processing. Besides, pedestal and vertical box structure column, matched up with the design of strengthen ribs to greatly enhance the Strength and rigidity of the whole structure.
| FMC-1060 Machine Specifications | ||||||||
| item | FMC-1060 | unit | standard accessories | specification | number | unit | ||
| Stroke | Max. x axis stroke | 1060 | mm | Fanuc controller | Oi MD | 1 | set | |
| Max. y axis stroke | 620 | mm | Complete chip enclosure | 1 | set | |||
| Max. z axis stroke | 610 | mm | Spindle air blower | 1 | set | |||
| Distance from spindle nose to table surface | 120-730 | mm | Automatic lubrication system | 1 | group | |||
| Distance from spindle center to column | 700 | mm | BT-40 spindle | 8000rpm | 1 | group | ||
| Table | Dimension | 1200*620 | mm | Heat exchanger | 1 | group | ||
| T-slot | 130*18*5 | mm | Tool kit and basic instruments | 1 | set | |||
| Max. loading capacity | 800 | kg | Work lamp | 1 | group | |||
| Spindle | Spindle speed | 8000 | rpm | Lump for readjust level | 1 | group | ||
| Spindle taper | ISO NO. 40 | mm | Operation manual | 1 | group | |||
| Spindle diameter | 70 | mm | ||||||
| Feed rate | X/Y/Z-Axis rapid traverse | 24/24/24 | m/min | Options Accessories | ||||
| Feedrate | 1-8000 | mm/min | 20 Umbrella type tools | 1 | group | |||
| Drive motor | Spindle drive motor | 7.5/11 | kw | 24 Knife-arm type tools | 1 | group | ||
| X/Y/Z axis motor | 2.5 | kw | Spindle oil cooler | 1 | set | |||
| Arm-type tool changing system(optional) | Tool capacity | 24 | pcs | Screw conveyer | 1 | set | ||
| Torm of chang tool | knife-arm | Chain conveyer | 1 | set | ||||
| Tool shank | BT-40 | Fourth-axis indexing disc | 1 | group | ||||
| Tool haft drag link | 45 | degree | Mitsubishi controller | M70 | 1 | set | ||
| Max. tool length | 300 | mm | Spindle | 12000rpm | 1 | set | ||
| Max. tool diameter | ø 80(ø 150) | mm | ||||||
| Max. tool weight | 7 | kg | ||||||
| Tool changing time | 2.2 | sec | ||||||
| General specification | Machine height | 2850 | mm | |||||
| Area(L X W) | 2800*2800 | mm | ||||||
| Machine weight | 7500 | kg | ||||||
| Driving demand | 22 | KVA | All specifications are subject to change without notice in advance. | |||||
| Barometrical demand | 6 | kgf/cm² | ||||||