1.Imported motion parts
2.High precision cutting efficiency
3.cutting head can be manual 60 degree cutting
Teenking CNC Machinery CO. Ltd is located in Foshan, Guangdong, China. Teenking is an ISO2001 factory with CE for the waterjet cutting machine. We are professional in producing waterjet cutting machine over than 10 years.
TK-Trump50-G3020-D machine has maxi 420mpa pressure pump with Maxi 3000*2000mm gantry cutting table with two independently cutting heads. The cutting accurency can be up to ± 0.08mm.
Teenking Waterjet has the following advantages:
1, the cutting accurancy, we are ± 0.08mm,
2, all stainless steel covers for the whole machine,
3, Low/high pressure function, easy for fragile materials cutting
Low/High pressure shifting by programmed piercing control, especially used for breakable material.
4, Special software for Teenking--includes different materails cutting parameter
Smart control softwear with built-in dynamic ideal cut speed for different material and thickness, from metal to stone, marble, granite, glass...
5, wireless keboard and mouse
Wireless remote-control keboard work with laser pointer system, absolute easily and quickly locating of cutting head.
6, cutting head can be manual 60 degrees cutting
Cutting head adjustable tilt ± 60 degrees in X (or X&Y) dirrection, available for chamfering.
7, laser pointer for easy positioning cutting head
8, Siemens Motor
9, electricial components: CE/CCC/UL wiring, Omron, Siemense & Schneider element.
10. A mesh/grid in cutting table esay for small parts collection
Work area ( X, Y )
It is a G3020 cutting table
TK-Trump G series(G=Gantry type)
The max travel of X axis: 3050 mm,
The max travel of Y axis: 2050 mm
The max travel of Z axis: 200 mm(8")
X = Bridge;
Y = Base
The max range of process(available cutting area): 3000X2000mm
Motion speed in each axis
0-10m/min(600ipm) in X&Y axis, 0-1.5m/min(60ipm) in Z axis
Nut running design, reduce the drag index of rotation, support a faster movement.
Tolerance in movement axis
X axis ± 0.05 mm (. 002"), Y axis± 0.08 mm (± 0.003")
± 0.025 mm per 300 mm (± 0.001" per ft)
Re-position precision
± 0.025 mm (± 0.001")
Max cutting tolerance
± 0.08mm(± 0.002")
The max speed of process
15 m/min (600 ipm)
Water-dust proof system
All the motion part is protecting by water-dust proof belt system
Auto- bridge balance adjust
Available in bridge-type cutting table
Power break protect
Complete solution for the power break protect during cutting
Sallage removal system
(optional) suitable design for sallage removal system
Lubrication system
Auto-lubricate system (control by CNC controller).
Auto accurate garnet feeder
Accurate Volume Control Garnet Feeder(controlled by CNC controller)-patent
Screw straighten system
Too long screw in protecting by screw straightening system- patent
Drive mode in each axis
CNC drive by servo motor system and ball-screw, linear-guideway in X, Y&Z axis.
Return Water Prevent Valve
Return water will come out from this valve, avoid water upstream to the accurate garnet feeder.
Easy fix tool
Work sheet can be easy to fix by special and useful tools.
Wireless keyboard
Remote control ± X, ± Y, ± Z and program start, stop, pause by wireless keyboard.
Laser pointer
Red cross laser light for positioning X, Y easy
High pressure piping
Ø 6.35X9 meters & Ø 9.53X1.6 meters high-pressure tube from USA.
Cutting head
Strong flame support in favor of smooth cut.
"ACCU" high efficiency cutting head: 15% faster cutting, available in ± 60 degrees tilting cut!
2.High precision cutting efficiency
3.cutting head can be manual 60 degree cutting
Teenking CNC Machinery CO. Ltd is located in Foshan, Guangdong, China. Teenking is an ISO2001 factory with CE for the waterjet cutting machine. We are professional in producing waterjet cutting machine over than 10 years.
TK-Trump50-G3020-D machine has maxi 420mpa pressure pump with Maxi 3000*2000mm gantry cutting table with two independently cutting heads. The cutting accurency can be up to ± 0.08mm.
Teenking Waterjet has the following advantages:
1, the cutting accurancy, we are ± 0.08mm,
2, all stainless steel covers for the whole machine,
3, Low/high pressure function, easy for fragile materials cutting
Low/High pressure shifting by programmed piercing control, especially used for breakable material.
4, Special software for Teenking--includes different materails cutting parameter
Smart control softwear with built-in dynamic ideal cut speed for different material and thickness, from metal to stone, marble, granite, glass...
5, wireless keboard and mouse
Wireless remote-control keboard work with laser pointer system, absolute easily and quickly locating of cutting head.
6, cutting head can be manual 60 degrees cutting
Cutting head adjustable tilt ± 60 degrees in X (or X&Y) dirrection, available for chamfering.
7, laser pointer for easy positioning cutting head
8, Siemens Motor
9, electricial components: CE/CCC/UL wiring, Omron, Siemense & Schneider element.
10. A mesh/grid in cutting table esay for small parts collection
Work area ( X, Y )
It is a G3020 cutting table
TK-Trump G series(G=Gantry type)
The max travel of X axis: 3050 mm,
The max travel of Y axis: 2050 mm
The max travel of Z axis: 200 mm(8")
X = Bridge;
Y = Base
The max range of process(available cutting area): 3000X2000mm
Motion speed in each axis
0-10m/min(600ipm) in X&Y axis, 0-1.5m/min(60ipm) in Z axis
Nut running design, reduce the drag index of rotation, support a faster movement.
Tolerance in movement axis
X axis ± 0.05 mm (. 002"), Y axis± 0.08 mm (± 0.003")
± 0.025 mm per 300 mm (± 0.001" per ft)
Re-position precision
± 0.025 mm (± 0.001")
Max cutting tolerance
± 0.08mm(± 0.002")
The max speed of process
15 m/min (600 ipm)
Water-dust proof system
All the motion part is protecting by water-dust proof belt system
Auto- bridge balance adjust
Available in bridge-type cutting table
Power break protect
Complete solution for the power break protect during cutting
Sallage removal system
(optional) suitable design for sallage removal system
Lubrication system
Auto-lubricate system (control by CNC controller).
Auto accurate garnet feeder
Accurate Volume Control Garnet Feeder(controlled by CNC controller)-patent
Screw straighten system
Too long screw in protecting by screw straightening system- patent
Drive mode in each axis
CNC drive by servo motor system and ball-screw, linear-guideway in X, Y&Z axis.
Return Water Prevent Valve
Return water will come out from this valve, avoid water upstream to the accurate garnet feeder.
Easy fix tool
Work sheet can be easy to fix by special and useful tools.
Wireless keyboard
Remote control ± X, ± Y, ± Z and program start, stop, pause by wireless keyboard.
Laser pointer
Red cross laser light for positioning X, Y easy
High pressure piping
Ø 6.35X9 meters & Ø 9.53X1.6 meters high-pressure tube from USA.
Cutting head
Strong flame support in favor of smooth cut.
"ACCU" high efficiency cutting head: 15% faster cutting, available in ± 60 degrees tilting cut!
| Work area ( X, Y ) | TK -Trump G series ( G = Gantry type ) | |||
| X = Gantry beam | Y = Baseframe | |||
| The max travel of X axis: | 3050 mm | |||
| The max travel of Y axis: | 2050 mm | |||
| The max travel of Z axis: | 200mm | |||
| The max travel of A axis: | N/A | |||
| The max travel of C axis: | N/A | |||
| Max range of process(available cut area): | 3000X2000x200mm | |||
| Motion speed on axis | Ball bearing running on ball screw, design for fast movement. | |||
| Max. Speed in X&Y axis: | 10m/min(600ipm) | |||
| Max. Speed in Z axis: | 2.5m/min(100ipm) in Z axis | |||
| Max. Speed in A axis: | N/A | |||
| Max. Speed in C axis: | N/A | |||
| Tolerance | X axis per 300 mm | ±0 .05 mm (.002"), | ||
| Y axis per 300 mm | ±0 .08 mm (±0.003") | |||
| Cut Tolerance in X,Y per 300 mm | ± 0.05mm(±0.002" per ft) | |||
| Re-position precision | ± 0.01mm (±0.0004") | |||
| Max cutting tolerancein whole machine range | ±0.10mm | |||
| The max speed of process | 10m/min (400 ipm) | |||
| Water-dust proof system | All stainless steel covered | |||
| All operative part are protected by water-dust proof device | ||||
| Auto-gentry balance | available in gentry-type machine, one-click to reset the balance of gentry(vertical of X and Y) | |||
| Grids under grates | For small parts collection after cut(Optional) | |||
| Sludge removal access | Preset pipe lines into bottom of water tank, suitable for sludge removal system(Optional) | |||
| Auto-Lubrication | Auto-lubricate feeding to ball screws, guides, and all operative articulations, to keep long life performance. | |||
| CNC garnet feeder | (Patent No. ZL200820205756.X) | Accurate Volume Control Garnet Feeder(controlled by CNC controller) To feed the garnet averagely and accurately. | ||
| Linear guide & Ball Screw | servo system: Panasonic or Yaskawa (if customer request) , from Japan | |||
| linear-guide: HIWIN brand , form TAIWAN | ||||
| ball-screw: TBI brand , from TAIWAN | ||||
| s traighten ing system | (Patent No. ZL200820205793.0) | Straighteningthe long ballscrew with pneumatic cylinder to support a fast and stable movement | ||
| Water Return Prevent | return water stop valve, to prevent garnet get wet and block in the nozzle. | |||
| Fast clamping tool | Smaller work sheet can be easy to fix by these tools providing with machine. | |||
| Wireless control | Remote control ± X, ±Y, ±Z and program start, stop, pause by wirelesskeyboard. | |||
| Wireless hand wheel | Remote control ± X, ±Y, ±Z and program start, stop, pause by wireless hand wheel(optional) | |||
| High pressure piping | Ø6.35x9 meters & Ø9.53x1.6 meters high-pressure tube from USA. | |||
| Cutting head | 1,Strong flame support in favor of smooth cut. 2,"FLOW" type high efficiency cutting head. 3, available +/-60 degree manually tilt. | |||
| Z-height control: | 1, clear coordinate as origin, setting raise up height and pierce height for cut. | Move cutting head to any position within the range of machine, clear the coordinate to zero as origin. cutting head will be raised up between parts, pierce in higher level in order to avoid the nozzle blocked by garnet. | ||
| 2,input thickness of material being cut. | Machine will understand and set the height of cutting automatically. | |||
| 3,By Auto-Height Sensor(optional)(Patent No. ZL201320255626.8) | Automatic tracking the height during whole processing by detector, detecting distance can be customized. | |||
| Laser cross line positioning system | (optional) | Help for fast positioning of nozzle, easily set origin for X and Y axis. | ||