1. Image printing.
1. Printed the image by ink jet printer, you may use ink special for heat transfer or common ink.
2. Choosing reasonable printer settings according to its direction for use. For example: Epson printers setting: Chose photo as quality option, common paper as paper type.
3. Allow the printed image to dry by nature.
2. Transfer step.
1. Set the transfer machine temperature to 165oC.
Pressure: Middling (deflect light); Time: About 15-20 seconds.
2. After the ink is dried, trim finished print(if large quantity, you could use computer cutting words). Do not leave white margin, except you need it.
3. Let the backs side upward, tear a very small corner, let the image side cling to desktop, then tear the back paper slowly.
4. Let the face of the image that you want to transfer UPWARD, and move to suitable place of clothing, covered by the back paper which is torn just now, let the gloss side downward, cover the image, then you can get the effect you want.
5. Cold peel.
Remark:
This paper is for business, which is special for dark clothing, which is designed and produced for heat transfer machine. Youd better use the special heat transfer machine.
The image do not need mirror image set up. Leave 0.32cm for margin if you could that will good for cutting to let the image beautiful and integrity. Please take care that do not warm-up clothing before transfers.
Washing after 24 hours, turn the clothing inside out before washing to make sure not to wash the image directly. Do not use bleacher etc. Fierceness for wash thing.
Do not DIP in for a long time. Air it in shadow immediately after dehydrating
1. Printed the image by ink jet printer, you may use ink special for heat transfer or common ink.
2. Choosing reasonable printer settings according to its direction for use. For example: Epson printers setting: Chose photo as quality option, common paper as paper type.
3. Allow the printed image to dry by nature.
2. Transfer step.
1. Set the transfer machine temperature to 165oC.
Pressure: Middling (deflect light); Time: About 15-20 seconds.
2. After the ink is dried, trim finished print(if large quantity, you could use computer cutting words). Do not leave white margin, except you need it.
3. Let the backs side upward, tear a very small corner, let the image side cling to desktop, then tear the back paper slowly.
4. Let the face of the image that you want to transfer UPWARD, and move to suitable place of clothing, covered by the back paper which is torn just now, let the gloss side downward, cover the image, then you can get the effect you want.
5. Cold peel.
Remark:
This paper is for business, which is special for dark clothing, which is designed and produced for heat transfer machine. Youd better use the special heat transfer machine.
The image do not need mirror image set up. Leave 0.32cm for margin if you could that will good for cutting to let the image beautiful and integrity. Please take care that do not warm-up clothing before transfers.
Washing after 24 hours, turn the clothing inside out before washing to make sure not to wash the image directly. Do not use bleacher etc. Fierceness for wash thing.
Do not DIP in for a long time. Air it in shadow immediately after dehydrating