BX-520 Fitting & Rewinding Machine( heating type)
Use:
Used for fitting and rewinding (heat at the same time) the release paper, mylar tape, double sided tape, bu-ki tape and polyester tape and so on.
Characteristics:
The machine adopts single-shaft for winding, the reeling and rewinding adopt pneumatic core shaft, the tension is under the control of magnetic powder clutch, centered on the panel for operation. The adhering wheel adopts silica gel wheels(well control de-gumming and viscose glue, the distance between wheels and adhering tension are under the control of cylinders for automatic adjustment. The heating wheels on the adhering wheel pass the testing of static balance, after adherence of basis materials, finish the adhering of different materials via heating. The large diameter of upper and lower adhering wheels and enlarging the touch surface of basis materials could improve adherence results, featured of smooth surface, fineness, no looseness or goffer, automatic length calculation of meter clock. The motor adopt frequency converter for speed adjustment for stable running. When necessary, the machine can be used as rewinding machine for better results than large rewinders.
Application:
Use:
Used for fitting and rewinding (heat at the same time) the release paper, mylar tape, double sided tape, bu-ki tape and polyester tape and so on.
Characteristics:
The machine adopts single-shaft for winding, the reeling and rewinding adopt pneumatic core shaft, the tension is under the control of magnetic powder clutch, centered on the panel for operation. The adhering wheel adopts silica gel wheels(well control de-gumming and viscose glue, the distance between wheels and adhering tension are under the control of cylinders for automatic adjustment. The heating wheels on the adhering wheel pass the testing of static balance, after adherence of basis materials, finish the adhering of different materials via heating. The large diameter of upper and lower adhering wheels and enlarging the touch surface of basis materials could improve adherence results, featured of smooth surface, fineness, no looseness or goffer, automatic length calculation of meter clock. The motor adopt frequency converter for speed adjustment for stable running. When necessary, the machine can be used as rewinding machine for better results than large rewinders.
Application:
| Maximum material diameter: | 1350mm (manufactured at requests of clients) |
| Maximum valid material diameter: | Ø500mm |
| Maximum and valid winding diameter: | Ø 300mm |
| Mechanical speed: | 0-1400revolution / minute |
| Diameter of winding tube: | Ø3" |
| Working voltage: | 380V 50HZ |
| Main motor power: | 5.5KW |