QTY9-18 Hydraulic Brick Making Machine
Equipment Superiority
1. Omnibearing vibration of table and mold improves the density of bricks. In Order to get even transmission of vibration force, two-way mode is adopted in The lower vibration with two vibration tanks linked to each other by two Hydraulic motors.
2. The material feeder with a spiral reticulation structure distributes materials Evenly, which shortens the operation time and then the mold cycling time.
3. Due to its multi-function and advanced technology, it can be applied to Produce various types of concrete blocks, standard bricks, perforated bricks And paving bricks
4. The main frame is wide for the convenience of mold filling, so more blocks Can be made. In order to get even pressure, three oil reservoirs are used, Which raise the pressure to as high as 100t.
5. It is applicable to sand, stone chips, slag, coal dust, fly coal ash, furnace slag And construction waste etc.
6. This machine with an integration of mechanism, electronics and hydraulics is Automatically controlled by the PLC computer, which supervises every phase Through the whole course.
Equipment Superiority
1. Omnibearing vibration of table and mold improves the density of bricks. In Order to get even transmission of vibration force, two-way mode is adopted in The lower vibration with two vibration tanks linked to each other by two Hydraulic motors.
2. The material feeder with a spiral reticulation structure distributes materials Evenly, which shortens the operation time and then the mold cycling time.
3. Due to its multi-function and advanced technology, it can be applied to Produce various types of concrete blocks, standard bricks, perforated bricks And paving bricks
4. The main frame is wide for the convenience of mold filling, so more blocks Can be made. In order to get even pressure, three oil reservoirs are used, Which raise the pressure to as high as 100t.
5. It is applicable to sand, stone chips, slag, coal dust, fly coal ash, furnace slag And construction waste etc.
6. This machine with an integration of mechanism, electronics and hydraulics is Automatically controlled by the PLC computer, which supervises every phase Through the whole course.
| Technical Specifications | |
| Production capacity | Hollow brick 390*190*190mm 9pcs/mould |
| Standard brick 240*115*53mm 50pcs/mould | |
| Road brick 0.6m2/mould | |
| Cycle time | 15-18s |
| Shift output | Hollow brick 390*190*190mm 14400pcs/8 hours |
| Standard brick 240*115*53mm 80000pcs/8 hours | |
| Road brick 960m2/8 hours | |
| Vibrating force | 80KN |
| Power | 42kw |
| Weight | 13.5T |
| Dimensions | 8300*4400*2950mm |
| moulding area | 1280x600mm |
| Workshop | 500m2 |
| Installed capacity | 100KVA |
| Items of investment | |
| Component of production line | Quantity |
| QTY9-18 Block Making Machine | 1 |
| Automatic brick conveyor machine | 1 |
| Automatic pallet feeder | 1 |
| Hydraulic unit | 1 |
| Control system(German) | 1 |
| Conveyer Belt | 1 |
| JS750 Mixer | 1 |
| Elevator/ Lowerator | 1 |
| Three-stage batching system(electronic calculation) | 1 |
| Free mould | 1 |
| Manual hydraulic forklift | |